Can you provide results for all the materials you have tested?

No, we do not provide general information because many results do not translate.  The characteristics of most materials will vary according to where they originated.

Also, each test we run is for a specific purpose.  The parameters of the machine are set for the customer's requirements, the purpose of which differs in each case.

What test results can you give us?

You tell us what results you are looking for, and if we have tested a similar material, we will advise you of the indicative results you may expect.

What is the particle size distribution in and out of the DevourX?

DevourX is a fine grinding machine, not a crusher.

The machine will achieve a size reduction of between 500 and 1200 to 1.

What moisture reduction can the machine achieve?

Moisture reduction rates are material specific.  Results will depend upon the input moisture content of the material, the type of material and model of machine.

What is the maximum moisture content that can be processed by the machine?

We do not recommend processing material which has a moisture content above 40%.

There are some applications where the machine can process material which has a moisture content above 40%, for example, it has produced exceptional results on brown coal with a moisture content of 63%.

How does the machine remove moisture?

Moisture is separated from material by physical events occurring within the machine and is exhausted with the air thru the collection system.

Does the machine require heat to reduce moisture?

No heat is required for the machine to accomplish moisture reduction.

What is the noise level of the machine?

The output noise level depends upon a number of factors including, the environment, the collection system, sound proofing and machine model.

The operational noise level is within the requirements of occupational health and safety guidelines.

How close to the machine will hearing protection be required?

We recommend hearing protection be worn at all times the machine is in operation.

Does the machine have a requirement for positive or negative pressure load?

The machine will operate at optimal efficiently unless the back pressure is too high.  Pressure can be controlled by the exhaust fans.

What control system does it use?

The control system is compatible with almost any commonly used system.